How To Tie Figure 8 Knots For Indoor Rock Climbing (4 Steps)

learning how to tie figure 8 knots for indoor rock climbing? is crucial to sailing. This useful knot is a robust, adaptable, and trustworthy knot that may be used for a wide range of applications. It has many uses on deck and on land and is simple to master.

The Flemish Bend and Figure-of-Eight Knot are other names for the Figure 8 knot. It is renowned for having a powerful stopper knot.

This knot can jam tightly but never bind and is incredibly secure thanks to its non-slip properties. The Figure 8 Knot is simple to undo, even when put under stress. It might, however, unravel in some situations.

The Figure 8 Knot has numerous practical applications because to its dependability and robust, non-binding qualities. It’s the perfect knot for boaters to use to stop a rope from disappearing or escaping a retention device.

The Figure Eight can be utilised by climbers as a trustworthy tie-in knot. Inspecting it is simple, and untying and retying it if necessary is also extremely simple.

One of the strongest stopper knots you can tie is the Figure 8, which is something that any good sailor should be able to do. To tie a figure 8 knot, follow these steps!

How To Tie Figure 8 Knots For Indoor Rock Climbing (4 Steps)

Take a good length of rope in your hands, and get ready to tie your first Figure 8 knot!

Step One: Make a single loop with the rope’s working end.

Step Two: Overlap the working end and standing end together. Create a second loop, this time with the working end crossing the standing end.

Step Three: Put the rope’s working end through the first loop you just created.

Step Four: To make the knot as tight as you like, pull on the rope at both ends.

Other Things To Consider

Once you have mastered the fundamental Figure 8 Knot, you should learn a few modifications and understand when to use them. Here are a few extra points to remember.

Alternative Methods

An alternate Figure Eight Knot is a doubled-up variation of the one in the illustration above. Since it creates a non-slip loop, this version is mostly used for rock climbing.

The Stein Knot is another well-liked version. A rope that has already been connected to anything else can be kept secure using this method. Technically speaking, it is considered device rigging rather than a real knot. Rappelers still choose this knot, though.

The Offset Figure 8 Bend is the last bend. We do not suggest utilizing this knot in any way. Poorly tied to connect two ropes, this knot has resulted in far too many accidents and fatalities. At all costs, avoid this knot!

For Rock Climbing

While the Offset Figure 8 is prohibited, rock climbers still value the Figure 8 Knot much. Compared to the Double Overhand Knot, it may not be the most widely used stopper knot, but it is nonetheless an essential knot to master. It is used to create the Double Figure 8 Loop and the Figure 8 Follow Through knot.

Other Uses

The Figure 8 Knot isn’t just for tying rope; it also has other applications. It’s a significant emblem, for instance, in heraldry. When used for heraldry, it is most frequently referred to as a Savoy Knot.

Members of the United States Navy can wear the knot as a mark of distinction. A emblem known as the Figure of Eight is worn by individuals who have earned the apprentice rating.

Last but not least, the Scout Association of the United Kingdom bestows a figure-of-eight symbol on corps members in honor of their long service and valor.

Other Stopper Knots

While the Figure 8 is a fantastic stopper knot, there are other options that are superior. If given the option, seasoned sailors and climbers typically favor the Double Overhand Knot or Stevedore Stopper Knot.

Even the Ashley Stopper Knot is favored by some. These options typically have more size, strength, and stability. An EStar Stopper Knot, however, might be a preferable option if you’re working with a slick rope made of current materials.

Use Of Figure 8 Knots For Indoor Rock Climbing.

The figure 8 is one of the most adaptable knots and may be used for anything from tying shoes to scaling mountains. The figure 8 knot works well for indoor rock climbing since it is simple to tie and untie as needed.

A climber can be fastened to a rope using the sturdy figure 8 knot. Additionally, it is a knot that is quite simple to tie and untie, which makes it perfect for indoor rock climbing.

Simply make a conventional overhand knot, then wrap a second loop around the first loop to form a figure eight. After tightening the knot, pass the second loop through the first.

Due of its strength and simplicity in tying and untying, the figure 8 knot is a fantastic knot for indoor rock climbing. It is a useful knot to know for other outdoor pursuits as well, such hiking and camping.

How To Tie A Figure 8 Knot In Different Ways.?

A figure 8 knot can be tied in a variety of ways, and the one you choose will depend on the situation. For instance, boaters often use one form of the figure 8 knot to tie their lines to cleats or other gear,

While climbers frequently use another variation to tie their rope to their harness. A couple of the most typical techniques to tie a figure 8 knot are listed below:

For Climbing:

  • 1. Make a small loop, or bight, at the end of your rope.
  • 2. Swing the rope’s end back through the bight after passing it around the anchor point.
  • 3. Take the rope’s tail and loop it around the anchor point once more before returning through the bight.
  • 4. To tighten the knot, pull on the rope’s two ends.

For Boating:

  • 1. Make a little loop, or “bight,” with the rope’s end.
  • 2. Continue the rope’s end.
  • a few guidelines for avoiding figure 8 knots coming undone

I’ve tied plenty of figure 8 knots in my time as an active outdoorsman. I’ve gathered some advice over the years on how to avoid getting these annoying knots in the first place.

  • 1. Start by tying a simple loop knot.
  • 2. Ensure that the loops are the same size.
  • 3. Tighten the loops but not too tightly.
  • 4. Make sure the center loops are not twisted and cross them.
  • 5. Cross the top loop over the bottom loop.
  • 6. Tighten the loops once more.
  • 7. You’re finished!

You may prevent those bothersome figure 8 knots from forming in the first place by adhering to these easy measures.

How To Tie Into A Climbing Harness?


Waist loop is the biggest loop.

The leg loops are the two medium-sized loops at the bottom.

The belay loop is vertical in shape.

The tie-in loops are the two tiny, horizontal loops in the center.


Like you would on a backpack, loosen the straps.


From the waist strap, hold the harness horizontally.

Find any twists in the straps when the leg loops are hanging down.

Find any twists and remove them.


Set the waist loop and two leg loops of the harness inside one another on the ground.

Step into the 2 leg loops, which need to be within the waist loop, with the belay loop in the front.

Pull the loop up to your waist by grabbing it and pulling it up. The leg loops ought to be pulled up onto your thighs as a result of this action. Comparable to donning pants

On the harness, look for the different tightening straps and pull them in.

Make sure that your body is in the center of the three tiny loops at the front.


Take hold of the climbing rope’s loose end.

Handle a rope that is three to four feet long.


The 3–4 feet of rope should hang from your other hand when you release the loose end in one hand.

Wrap the rope hanging from your hand around the loose end you have taken.

Pull the loose end up and through the newly formed loop.

Tighten it up.

Now your knot ought should resemble a figure 8. You made a mistake if it’s a 9 or a 7.

This is how you tie your first figure eight.


Put the rope’s loose end through both tie-in loops.

As soon as the figure eight is approximately an inch away from your loops or harness, keep dragging the rope up through them.

Take the free end and wrap the eight knot around itself again, doubling each part of the knot as you go.

There should be five parallel pairs of two ropes.

What Is The Reason Behind The Climbing Figure 8 Knot?


The primary benefit of the figure eight for me is how simple it is to confirm if it is knotted properly.

Figure eight knot mistakes are simple to spot with a quick visual inspection. The figure eight knot is the simplest tie-in knot to determine if it is correct or not, even when you’re exhausted, it’s dark and rainy outside, or maybe for some reason you’re inebriated*.

It also has other benefits. It is bombproof and will assist in absorbing some of the stresses that a fall or weight would apply to the rope.

There are certain drawbacks to it. If it has been loaded, it may be difficult to untie. particularly if it has been loaded numerous times. Particularly if you fail ten or eleven times while attempting to complete the final move before the chains. In some circumstances, it might be impossible to untie without help:))

Another excellent and bombproof knot is the bowline, which also has certain advantages over the figure eight. Even if it has been loaded, it is considerably simpler to untie and typically uses less rope to knot, retaining as much rope length as feasible.

The figure eight has the advantage of being easier to discern whether it is tied correctly, whereas the bowline has the disadvantage of being more difficult to tie, especially for novice climbers.

Don’t get me wrong. If I had to choose which tie-in knot made it simpler to determine at a glance if it was tied correctly or not, I would choose the figure eight above any other. I know how to tie a bowline, and I can tell you if a knot is a bowline or not.

In the end, I believe that is why the figure eight knot is so well-liked. I want to make sure you know how to tie in securely if I’m teaching you how to climb. A figure eight knot is significantly more likely to be taught to a novice climber than a bowline. It concerns safety.

It is not a good idea to climb when intoxicated; instead, stick to bouldering in a well-padded area (either indoors or outdoors), no higher than two or three times your own height.

FAQ’S On: How To Tie Figure 8 Knots For Indoor Rock Climbing?

How To Tie Figure 8 Knots For Indoor Rock Climbing

Do You Need A Stopper Knot On A figure 8?

You’ll be expected to tie a properly retraced figure-8 and a stopper knot to keep it from coming undone at pretty much any gym you enter. Once in a while, a climber would begin a climb with a proper backup knot in place, only to discover halfway up the climb that their backup knot had come undone.

What Knot Do You Use To Tie In rock Climbing?

The Eight-Trace (or Trace Figure-Eight Knot)

You should start with learning your tie-in knot because it is the only one you will ever use to secure yourself to the end of the rope. Climbers tie in using a variety of knots, but the Trace-Eight is the simplest to master and the least likely to come undone.

Why Do Climbers Use A Figure 8 Knot?

The figure eight is the preferred knot among climbers since it is simple, quick to master, won’t unravel, and is simple to inspect.

How Safe Is The Figure 8 Knot?

Both teaching and safety checks are simple. With fresh, stiff, or greasy ropes and in circumstances where the knot might scrape against the rock (chimney climbing), this knot is also more reliable than the bowline.

What Is The Purpose Of A Sheet Bend Knot?

Sailors frequently employ the sheet bend, also known as the weaver’s knot, to join two ropes of various diameters. One rope’s end is wrapped around the other’s loop, passed through it, and then tucked under its own standing portion.

How Strong Is A Figure 8 Knot?

approximately 75-80%

A correctly connected Figure Eight Follow Through is more than strong enough, to put it simply. How robust is it? In pull tests, it snaps at a strength of around 75–80% of the rope’s maximum.

Leave a Comment